UTAR Institutional Repository

Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | F | G | H | J | K | L | M | N | O | P | Q | S | T | W | Y
Number of items at this level: 248.

A

An, Eng Ling (2012) Design and manufacturing of generic unmanned aerial vehicle fuselage assembly (payload bay, empennage, wheel assembly and wingbox) via low cost fiber glass molsing process. Final Year Project, UTAR.

Ang, Chong Huah (2015) Degradation of A Bi-Facial Solar Panel under the Sun. Final Year Project, UTAR.

Ang, Jia Yi (2022) Enhancement techniques on a multistage solar distiller. Final Year Project, UTAR.

Ang, Wei Bing (2013) Development of iterative analytical procedure for boiler tube analysis in matlab. Final Year Project, UTAR.

Au, Zhishan (2020) Investigation Into Single Pixel Imaging: Images Without A Camera. Final Year Project, UTAR.

B

Ban, Sau Keong (2010) Design and modeling of portable, economical and high payload unmanned aerial vehicle for aerial surveillance. Final Year Project, UTAR.

Boey, Daniel Mun Weng (2019) Odometry Error Reduction in Wheelchair Using More Than One Sensor. Final Year Project, UTAR.

C

Cham, Leslie Yeong Lie (2022) Studies on the explosion protection in hazardous area based on intrinsically safe method exi according to iec60079-14. Final Year Project, UTAR.

Chan, Huaxuan (2021) Development of a wearable eye tracker to control an autonomous wheelchair. Final Year Project, UTAR.

Chan, John De-Xing (2016) Optimization for Power Transmission System of Upper Limbs Rehabilitation Device. Master dissertation/thesis, UTAR.

Chan, King Sern (2020) Study of Fatigue Behaviour Of High Speed Steel Skh51 In Forging Process. Final Year Project, UTAR.

Chan, Matthew Yun Xin (2022) Development of an aeration system for smart aquaculture farming. Final Year Project, UTAR.

Chan, Mun Hoo (2018) Design and development of velocity sensitive MIDI electronic drum kit using piezoelectric sensors. Final Year Project, UTAR.

Chan, Yi Han (2022) Design of an end effector for a manipulator with loading and unloading mechanisms. Final Year Project, UTAR.

Chang, Keng Fuh (2011) Optimisation of Leaf Spring Deflection Using Dynamic Characteristics. Final Year Project, UTAR.

Chaw, Zhi Xin (2021) Design and evaluation of mutilayer sound absorber. Final Year Project, UTAR.

Cheah, Choon Kit (2022) Design and develop an active mixer extruder for ink based 3D printer. Final Year Project, UTAR.

Cheah, Zhen Ke (2020) Electrical Characteristics of Aluminum Air Battery Under Open-Circuit And Closed-Circuit Conditions. Final Year Project, UTAR.

Chee, Kong Meng (2020) Effect of Ethanol On The Combustion Characteristic Of Palm Biodiesel. Final Year Project, UTAR.

Chee, Teik Yee (2024) Adoption and practices of occupational health and safety management system in Malaysian construction sites. Master dissertation/thesis, UTAR.

Chen, Tong Yang (2019) Study of Few Layer Graphene Synthesised by Interlayer Catalytic Exfoliation Method. Final Year Project, UTAR.

Cheng, Chia Loon (2011) In-vitro optically aided robotic manipulation (IVOARM) system and algorithm development. Final Year Project, UTAR.

Cheng, Chuen Rong (2011) Effects of Manganese (IV) Oxide on The Physical, Mechanical And Microstructural Properties of Alumina. Final Year Project, UTAR.

Cheong, Yu Jian (2024) A revised rainfall-runoff model for an improved runoff estimate. Final Year Project, UTAR.

Chew, Jee Xiong (2016) An Economic Assessment of Standby Diesel Generator For Peak Shaving in Commercial and Industrial Buildings. Final Year Project, UTAR.

Chew, Yuin Yee (2020) Internet Of Things Water Quality Monitoring System. Final Year Project, UTAR.

Chia, Kok Siang (2011) Design in-vitro optically aided robotic manipulation (INOARM). Final Year Project, UTAR.

Chiew, Hui Zhong (2013) Fire dynamics simulation (FDS) study of fire in structures with curved geometry. Final Year Project, UTAR.

Chiew, Zhen Xiang (2024) Radiative cooling with thermoelectric generator for power generation. Master dissertation/thesis, UTAR.

Chin, Chvez Zhee Ming (2024) Design of a swimming small soft robot for underwater applications. Final Year Project, UTAR.

Chin, Siao Shi (2017) Effect of Age on Steady-State Visual Evoked Potential. Master dissertation/thesis, UTAR.

Chin, Wai Lok (2021) Object Localization In 3D Point Cloud. Final Year Project, UTAR.

Chin, Yu Hong (2019) Investigation of the Wavy Channel Cold Plate Thermal Performance. Final Year Project, UTAR.

Choi, Kean Boon (2015) Development of Small Floating Platform with Tuned Liquid Column Damper. Final Year Project, UTAR.

Chong, Chee Hao (2020) Failure analysis of surface defects on aluminium extrudates. Final Year Project, UTAR.

Chong, Chee Hung (2020) The Influence of Graphene On The Mechanical Properties And Hydrothermal Aging Of 3 Mol% Yttria Stabilised Tetragonal Zirconia Polycrystalline At Various Sintering Conditions. Final Year Project, UTAR.

Chong, Chia Hsing (2019) Dielectric Characterisation of Foamed Concrete for Density and Compressive Strength Evaluation. Final Year Project, UTAR.

Chong, Kai Wen (2024) Design a visual dot probe task for occupational stress measurement in manufacturing. Final Year Project, UTAR.

Chong, Kok Yung (2015) Flow Induced Acoustics in Corrugated Pipe. Final Year Project, UTAR.

Chong, Teck Sing (2018) Detection of Piping Internal Defect through Simulation using Guided Wave Method. Master dissertation/thesis, UTAR.

Chong, Wei Seng (2020) Development of An Eye Tracker And Wheelchair System That Can Self Navigate In A Closed Environment. Final Year Project, UTAR.

Chong, You Chuen (2024) Finite order universal portfolio generated by recursive calculation of continuous random variable's moment generating function. Final Year Project, UTAR.

Choy, Jia Qi (2023) Evaluation of an electric vehicle (EV) disposal process and benchmarking on the EV technology. Final Year Project, UTAR.

Chua, Eric Shi Khang (2017) Portable Surgical Bag Pack. Final Year Project, UTAR.

Chua, Yun Chin (2021) OEE Implementation On Safety Helmet Plastic Injection Process. Final Year Project, UTAR.

Chuah, Chung Zhih (2021) Anodic and hydrothermal growth of iron oxide Nanoporous-Nanorod film for chromium removal. Master dissertation/thesis, UTAR.

Chuo, Sing Ern (2023) Thermal stability enhancement of mapbi3 film by incorporating poly(methyl methacrylate) additives and encapsulation layers for perovskite solar cell application. Final Year Project, UTAR.

Ch’ng, Kai Liang (2020) Alignment-Free Cancelable Iris Key Binding Scheme. Final Year Project, UTAR.

D

Doresharan, Gangatharan (2021) Experimental investigation characteristics of palm biodiesel blends on the combustion diethyl ether. Master dissertation/thesis, UTAR.

F

Foo, Jong Wei (2011) Controller for A Prosthetic Arm. Final Year Project, UTAR.

Foo, Shi Wei (2012) Design and develop of an automated tennis ball collector and launcher robot for both able-bodied and wheelchair tennis players - ball recognition systems. Final Year Project, UTAR.

Fung, Kit Fai (2018) Comparative Study of Hybrid Support Vector Regression Drought Forecasting Models for Langat River Basin. Master dissertation/thesis, UTAR.

G

Gee, Yih Khoon (2011) Application of Sequential Experimentation in A Paper Gyrocopter System. Final Year Project, UTAR.

Goh, Qing Hao (2021) Extreme action recognition from real-time video using time-series deep learning model. Final Year Project, UTAR.

H

Heng, Teoh Chin (2015) Intelligent Control For Energy Management System For Reducing Ancillary Services. Master dissertation/thesis, UTAR.

Hew, Teng Wei (2018) AR-UTAR Kampar campus navigation. Final Year Project, UTAR.

Ho, Mun Ling (2020) Integration of solar powered fans and moving-aircavity for attic temperature reduction. Final Year Project, UTAR.

Hoong, Vincent Yong Sheng (2018) Development of 3d Printing Framework Using PC-based PLC. Final Year Project, UTAR.

How, Kenneth Kam Leong (2010) Application of Central Composite Designs in A Paper Gyrocopter System. Final Year Project, UTAR.

Hwang, Jason Wong Shyh Long (2013) Synthesis and characterisation of chitosan from shrimp shell. Final Year Project, UTAR.

J

Jiang, Chengjun (2023) Audio files comparison with wavelet transform. Final Year Project, UTAR.

Jin, Zhe (2015) Privacy Preserving Minutia-Based Fingerprint Template Protection Techiniques. PhD thesis, UTAR.

Jong, Fabian Chin Peng (2019) Numerical Modelling of the Electric Vehicle Cabin Cooling. Final Year Project, UTAR.

K

Kam, Heng Keong (2015) Effect of Tool Eccentricity on the Static and Fatigue Strength of the Joint made by Mechanical Clinching Process. Master dissertation/thesis, UTAR.

Kam, Weng Joe (2020) Study of carbon black generated from pyrolysis of passenger tyres added with pvoh. Final Year Project, UTAR.

Kan, Donica Pei Xin (2013) Compact Paper Recycling System (Soaking, Blending and Drying Mechanism). Final Year Project, UTAR.

Kee, Shin Yiing (2018) Development of light absorptive polymeric form stable composite phase change material for thermal storage. PhD thesis, UTAR.

Khaw, Ji Wei (2020) Investigation on media pack configurations for air filtration devices. Final Year Project, UTAR.

Khaw, Jia Ying (2021) Design and development of automated token assembly system. Final Year Project, UTAR.

Khoo, Jun Xiang (2015) Smartphone Based Augmented Reality. Final Year Project, UTAR.

Khoo, Wen Loong (2022) Evaluation of charging and discharging performances of the rechargeable aluminium-air battery. Final Year Project, UTAR.

Khor, Pey Wen (2023) Design and development of latex cups collector robot V3 (mechanical). Final Year Project, UTAR.

Khor, Zheng Yu (2020) Development of Hybrid Aluminium Air Battery-Fuel Cell System. Final Year Project, UTAR.

Ko, Sin Yee (2024) Investigation of fluoride pollutant removal from wastewater. Final Year Project, UTAR.

Koh, Ling Xian (2022) Development of simulation model of a hospital for robotic simulation in ros. Final Year Project, UTAR.

Koh, Yann Yee (2021) Electro-modeling of the aluminium-air battery. Final Year Project, UTAR.

Koh, Zu Heng (2024) Investigation on the material compositions on air cathode in an aluminium- air battery. Final Year Project, UTAR.

Kong, Koon Yi (2024) Effects of mechanical activation and sodium hexametaphosphate on formation of magnesium orthosilicate ceramic powder. Final Year Project, UTAR.

Krishnan, Subramaniam (2019) Fabrication of Stewart platform actuated by pneumatic artificial muscle for foot-ankle rehabilitation. Master dissertation/thesis, UTAR.

Kuah, Jie Sheng (2022) Development of a chemical kinetic model for hydroprocessed renwable jet fuel for turbine engines. Final Year Project, UTAR.

Kuek, Wee En (2022) Performance of thermoelectric cooler powered by photovoltaic cell with and without cooling method. Master dissertation/thesis, UTAR.

L

Lau, Jia Rong (2022) Dynamic characteristics of rubber pad for vibration mitigation. Final Year Project, UTAR.

Lee, Kai Fan (2022) Investigate the usage of heat pipe as air conditioning unit. Final Year Project, UTAR.

Lee, Kean Lin (2011) Development of a fast logo recognition system using GPU. Final Year Project, UTAR.

Lee, Kongting (2018) Prediction of Bearing Remnant Life. Master dissertation/thesis, UTAR.

Lee, Kwok Seng (2011) The Noise Reduction Through Lecture Hall’s Wall. Final Year Project, UTAR.

Lee, Min Khuan (2023) Development of pole-and-knife springs system for harvesting oil palm fruit. Final Year Project, UTAR.

Lee, Ren Yi (2022) Smart cashierless checkout system for retail using machine vision. Final Year Project, UTAR.

Lee, Shau Meng (2024) Study of the combined effect of thermal storage and sunlight concentration for a solar distiller. Final Year Project, UTAR.

Lee, Sze Shin (2014) Performance study on cooling of concentrator photovoltaics using computational fluid dynamics simulation. Master dissertation/thesis, UTAR.

Lee, Wei Sheong (2023) Optimisation of bioleaching of Malaysian and Chinese Kaolin. Final Year Project, UTAR.

Lee, Wen Zhe (2023) Optical simulation approach as a technique to determine the efficiency of ultraviolet germicidal irradiation in surface disinfectant. Master dissertation/thesis, UTAR.

Lee, Xue Yong (2015) An Automated Approach for the Morphological Characterization of Activated Sludge Flocs and Filaments Using Image Analysis. Master dissertation/thesis, UTAR.

Lee, Ying Hua (2018) 3D Design and Printing for Rapid Prototyping. Final Year Project, UTAR.

Lee, Yit Fung (2011) Snake-like robot (mechanical part). Final Year Project, UTAR.

Lee, Zhan Shin (2023) Investigation of the mechanical properties changes for multimaterial composite 3d printing. Final Year Project, UTAR.

Lee, Zhen Sheng (2023) Development of a low-cost food scrap and grease separator. Final Year Project, UTAR.

Leong, Mei Yee (2017) Effects of Anodization Electrolyte on the Formation of Nanoporous Titanium Oxide (Tio2) for Photocatalytic Application. Final Year Project, UTAR.

Leong, Pou Yee (2023) Development and evaluation of a wood classification system usinga low-cost miniature nir sensor. Final Year Project, UTAR.

Leong, Qi Ye (2023) Battery management system for automated guided vehicle. Final Year Project, UTAR.

Leong, Wai Lun (2021) Hybrid flexible solar photovoltaic and electric double-layer capacitor for wearable device application. Final Year Project, UTAR.

Leow, Ruey Shyan (2011) 3D object reconstruction using multiple-view geometry : sift detection. Final Year Project, UTAR.

Leow, Tzyy Shyuan (2011) 3D object construction using multiple view geometry : construct model with all the given points. Final Year Project, UTAR.

Liau, Kai Hao (2021) IoT Based Personal Safety And Protection System. Final Year Project, UTAR.

Liew, Chen Fung (2024) Development and validation of an equipment cost efficiency framework (ECEF) for improving operational and financial performance of production resources. PhD thesis, UTAR.

Liew, Hau Run (2021) Static water quality monitoring system. Final Year Project, UTAR.

Liew, Jian Ping (2016) Rheological Studies of Silver Nanoparticles Based Isotropic Conductive Adhesive (Ag-ICAs) for Microelectronic Packaging Applications. Master dissertation/thesis, UTAR.

Liew, Yee Chang (2015) Intelligence Semi-Automated Wheelchair (Obstacle Detection System). Final Year Project, UTAR.

Liew, Yi Hui (2011) Low Cost Fibreglass Go-Kart. Final Year Project, UTAR.

Liew, Yuin Yue (2022) Performance of nano-particle assisted phase change materials in a solar desalination system. Final Year Project, UTAR.

Lim, Aberdeen Jian Rong (2011) Low Cost Fibreglass Go-Kart. Final Year Project, UTAR.

Lim, Adrian Jern Ee (2019) Multi-stage Prediction of Bearing Failure. Final Year Project, UTAR.

Lim, Chee Xuan (2015) Temperature reduction in buildings by geothermal air cooling system. Final Year Project, UTAR.

Lim, Christopher Yi-Jin (2015) Comparative Performance Tests on Thermosyphons and Application as Heat Pipe Heat Exchanger Cooler Operating Between 30-100°C. Master dissertation/thesis, UTAR.

Lim, Chun Yong (2022) Development of ceramic extruder for three dimensional printing. Master dissertation/thesis, UTAR.

Lim, Edwin Chui Seng (2013) Evaluation of high temperature boiler tubed using iterative analytical approach. Final Year Project, UTAR.

Lim, Kar Yap (2023) Developing composite filament from recycled polypropylene and agriculture waste for fused deposition modeling. Final Year Project, UTAR.

Lim, Koo Ho (2011) Architectural Acoustic In Factory. Final Year Project, UTAR.

Lim, Pin Jie (2019) Investigation on the Droplet Combustion Behaviour of Palm Biodiesel-graphite Oxide Blends. Final Year Project, UTAR.

Lim, Sin Shian (2022) Three-dimensional Automated Optical Inspection (AOI) with machine learning approach. Final Year Project, UTAR.

Lim, Wai Loon (2011) Dynamic signature verification system. Final Year Project, UTAR.

Lim, Wan Lynn (2020) Study Of Heat Pump Drying System. Final Year Project, UTAR.

Lim, Wayne Yin Hern (2024) Development of a green self-powered sensor. Final Year Project, UTAR.

Lim, Wen Qing (2021) Development Of Surface Surveillance System Using Autonomous Drones. Final Year Project, UTAR.

Lim, You Yi (2023) Development of fire protection duct for the safety-relevant circuits. Final Year Project, UTAR.

Lim, Yu Hung (2011) Design and development of data management system for motion detection system. Final Year Project, UTAR.

Lim, Zhi Jian (2022) Implementing slam for practical scenarios. Final Year Project, UTAR.

Lingeswaran, Sundaramoorthy (2020) Integration of Active And Passive Cool Roof System For Attic Temperature Reduction In Guardhouse. Final Year Project, UTAR.

Loh, Win Tson (2017) Performance Comparison and Life Cycle Analysis for Constants Speed Chiller and Variable Speed Chiller. Master dissertation/thesis, UTAR.

Looi, Chen Zheng (2021) Development Of Motion Planer And Navigation System For An Office Assistant Robot. Final Year Project, UTAR.

Low, Jeng Lam (2013) Face Recognition System Using Complete Grabor Filter with Random Forest. Final Year Project, UTAR.

Low, Ze Xian (2023) Development of a wearable glove for virtual reality application. Final Year Project, UTAR.

Lye, Jun Yan (2024) Investigation of cellulose separator in aluminium-air battery. Final Year Project, UTAR.

M

Mah, Wah Lai (2017) A Steady-State Visual Evoked Potential-Based Brain Computer Interface System for Patients with Motor Disabilities. Master dissertation/thesis, UTAR.

Mah, Wai Peng (2018) Movable Water Quality Monitoring Systems for Aquaculture Tank (Indoor). Final Year Project, UTAR.

Mohd Yusairy, Mohd Yusri (2017) Analysis of Cost Comparison for the Production of 1kw Energy for both Internal Combustion Engine and Electric Vehicle. Master dissertation/thesis, UTAR.

Muaid, Abdulkareem Alnazir Ahmed (2023) Traffic control strategy for adaptive signal controller based on reinforcement learning and local communication channel. PhD thesis, UTAR.

N

Natalee, Corbett (2022) Study of the workplace accidents caused by human error in the manufacturing industry using structural equation modelling (SEM). Final Year Project, UTAR.

Neo, Teng Yi (2011) Investigation on free energy magnet motor. Final Year Project, UTAR.

Ng, Chin Yong (2022) Trajectory planning and simulation for 3d printing process. Final Year Project, UTAR.

Ng, Ching Hau (2011) Fire and smoke detection based on low-cost camera. Final Year Project, UTAR.

Ng, Jia Xuan (2022) Investigation of the availability of biodegradable polymers in Malaysia and its impact to environment issues in Malaysia. Final Year Project, UTAR.

Ng, Jin Siang (2023) Development of coordinating algorithm for rendezvous task of mobile robots. Final Year Project, UTAR.

Ng, Kok Leong (2023) Development of a compact light detection and ranging module. Master dissertation/thesis, UTAR.

Ng, Sher Li (2021) Adsorption and magnetic treatment effect on fluoride-dye mixture wastewater. Final Year Project, UTAR.

Ng, Shiau Ping (2013) Design and Contruction of Non- Imaging Dish Concentrator System (Cooling System). Final Year Project, UTAR.

Ng, Soo Sien (2022) Analysis of the geometrical impact on the rubber damper properties. Final Year Project, UTAR.

Ng, Wei Yuan (2023) Development of a smart edge device for fire detection. Final Year Project, UTAR.

Ng, Yau Jia (2013) A fuzzy logic controller for translational and rotational control of a commercially available motorized wheelchair. Final Year Project, UTAR.

Ng, Yee Ping (2020) Analytical Solution for Mechanical Stresses Of Multilayered Hollow Spherical Pressure Vessel. Final Year Project, UTAR.

Nor Haziq, Naqiuddin Hamli (2019) Design and Development of Novel Fin Micro Channel Heat Sink for High Heat Flux Application. Master dissertation/thesis, UTAR.

O

Oh, Zi Xin (2022) Design and development of split-ring resonator-based sensors for dielectric constant measurement. Master dissertation/thesis, UTAR.

Ong, Chia Koon (2020) Develop and test a wearable eye tracker. Final Year Project, UTAR.

Ong, Chian Shen (2011) Prototype of an efficient hyrdopower plant. Final Year Project, UTAR.

Ong, Eu-Jeen (2016) Reproduce Sound through Subtle Vibrations in the Imagery. Final Year Project, UTAR.

Ong, Wei Chao (2022) Development of the hybrid storage system using thermoelectric generator. Final Year Project, UTAR.

Ong, Yon Siang (2024) A simulation model of gramma configuration stirling engine with non-sinusoidal motion. Master dissertation/thesis, UTAR.

Ong, Yon Yuan (2016) Muscle-Alike Actuator based on Ionic Polymer Metal Composite (IPMC). Final Year Project, UTAR.

Ooi, Jong Boon (2013) Analysis and optimization of portal axle unit using finite element modelling and simulation. Master dissertation/thesis, UTAR.

Owi, Chun Kit (2022) Study of three dimensional composites printing material through simulation. Final Year Project, UTAR.

P

Pang, Jun Hao (2024) Optimisation of Kaolin bioleaching using surface, chemical and structural studies. Final Year Project, UTAR.

Phang, Chee Hoe (2012) Design a microcontroller based motor controller with heat sensor. Final Year Project, UTAR.

Poong, Zui Xin (2019) Application of Guided Wave for Pipeline Defect Identification. Final Year Project, UTAR.

Poy, Yi Ler (2023) Modelling of multi-robot system for search and rescue. Final Year Project, UTAR.

Puang, En Yen (2013) Kinect Sensor on Mobile Robot Autonomous Indoor Mobile Robot Navigation. Final Year Project, UTAR.

Puteri Aisyah, Megat Shariffudin (2022) Piezoelectric energy floor tiles performance and effectiveness as building energy conservation measures for different types of buildings in Malaysia. Master dissertation/thesis, UTAR.

Q

Queh, Zhi Xian (2021) Thermal analysis of multistage solar distiller. Final Year Project, UTAR.

S

Seah, You (2023) Smart attendance system with Iot based face recognition using deep learning approach. Final Year Project, UTAR.

See, Choon Ming (2022) Optimisation of energy consumption and greenhouse gases emissions of nickel in electric vehicle (EV) batteries. Final Year Project, UTAR.

Sim, Tze Heng (2012) Real time iris recognition system. Final Year Project, UTAR.

Sin, Han Bin (2022) Development of task distribution algorithm for multi-robot coordination system. Final Year Project, UTAR.

Siow, Wen Hao (2024) Three-dimensional coverage control for multi-unmanned aerial vehicle. Final Year Project, UTAR.

Soh, Ying Wei (2013) Self navigating wheelchair control (obstacle avoidance). Final Year Project, UTAR.

Soon, Ming Siang (2023) Direct ink writing of alumina threedimensional structures. Final Year Project, UTAR.

Suubitaa, Spencer Sam (2019) An investigative study of utilization of waste engine oil and vegetable oil as a binder for the production of environmental friendly E-vege roofing tile. Master dissertation/thesis, UTAR.

T

Tai, Zhen Hang (2022) Transparent electrode for harvesting energy using a thermoelectric principle. Final Year Project, UTAR.

Tan, Cheow Hoong (2015) Development of Thermal Interface Material. Final Year Project, UTAR.

Tan, Chuan Zhi (2021) Design Of A Soft Gripper For Pick And Place Application. Final Year Project, UTAR.

Tan, Dicky (2022) Development of a smart elevator using embedded system. Final Year Project, UTAR.

Tan, Jia Hui (2021) Formulation of ceramics feedstock for low pressure injection moulding. Final Year Project, UTAR.

Tan, Jian Bin (2022) Development of metal-doped zinc ferrite magnetic sensor material from steel dust waste. Final Year Project, UTAR.

Tan, Johnin (2019) Development of a Reduced Methyl-cyclohexane Model for Diesel Engine Applications. Final Year Project, UTAR.

Tan, Jon Wen (2012) Development of an industrial pick and place machine for gauge repeatability and reproducibility (GGR)measure of vision modules. Final Year Project, UTAR.

Tan, Kai Feng (2022) Integration of thermal insulation material and active moving air cavity ventilation in a cool roof system for attic temperature reduction. Final Year Project, UTAR.

Tan, Keng Lim (2022) Design of a sustainable rainwater harvesting system. Final Year Project, UTAR.

Tan, Kok Hee (2019) An analytical solution of thermo-elastic behaviour of multi-layered cylindrical wellbore for underground hydrogen storage. Master dissertation/thesis, UTAR.

Tan, May May (2024) Intrusion detection system (IDS) using machine learning. Final Year Project, UTAR.

Tan, Peh Sern (2016) Upper Extremities Interactive Rehabilitation Device for Children with Cerebral Palsy. Final Year Project, UTAR.

Tan, Roe Djer (2020) Development of Alumina Based Feedstock For Fused Deposition Modelling 3D Printer. Final Year Project, UTAR.

Tan, Seng Wah (2022) Three-dimensional printing of lean clay ceramics. Final Year Project, UTAR.

Tan, Shi Hao (2021) Convenient User Interface For Labelling 3D Point Cloud. Final Year Project, UTAR.

Tan, Shin Yin (2021) Internet Of Things Based Real-Time Water Quality Monitoring System For Water Storage Tank. Final Year Project, UTAR.

Tan, Sin Hooi (2021) Quantification of secondary phases in 6063 aluminium alloy. Final Year Project, UTAR.

Tan, Syh Yuan (2014) Cryptanalysis, provable security and implementation of fuzzy identity-based cryptography. PhD thesis, UTAR.

Tan, Tar Wei (2023) Development of battery charging station for automated guided vehicle. Final Year Project, UTAR.

Tan, Wei Lun (2023) Development of power conditioning circuit for reliable use of battery on automated guided vehicle. Final Year Project, UTAR.

Tan, Wei Shin (2024) Direct ink writing of forsterite porous structure. Final Year Project, UTAR.

Tan, Weng Cheong (2023) Design and development of novel polypropylene based aluminium-air battery system. PhD thesis, UTAR.

Tan, Xuan Qing (2023) Hand blood vessels pattern recognition. Final Year Project, UTAR.

Tan, Yi Ying (2019) Feasibility of Forming Al5052-polymer Hybrid Clinch Joint With Round Grooved Clinch Set. Final Year Project, UTAR.

Tan, Zhen Sheng (2022) Thermal oxidation of iron oxide nanosheets in the presence of potassium iodide for chromium removal. Final Year Project, UTAR.

Tan, Zitang (2023) Design of soft robot for maneuvering in tight spaces. Final Year Project, UTAR.

Tang, Nicholas Kah Fai (2022) Radiative cooling with thermoelectric for power generation. Final Year Project, UTAR.

Tang, Tee Yang (2017) Development of Hand Cycle for Children with Cerebral Palsy (Wheelchair Propulsion Motion). Final Year Project, UTAR.

Tay, Chih Chia (2019) Optimization of the Bottom Profile of U-shape Oscillating Water Column. Final Year Project, UTAR.

Tee, Nicholas Hieng Hock (2013) Investigation and Testing of Wind Turbine and Photovoltaic Systems Integrated with Micro-Grid at UTAR Campus. Final Year Project, UTAR.

Teh, Junjie (2020) Household Waste Segregation Using Intelligent Vision System. Final Year Project, UTAR.

Teh, Yew Wei (2024) Computational modeling of running biomechanics in amateur runners. Final Year Project, UTAR.

Teo, Zhin Hang (2022) Vision-based robot indoor navigation. Final Year Project, UTAR.

Teoh, Han Wei (2020) Passenger Counting With Face Detection. Final Year Project, UTAR.

Thee, Kang Wei (2016) Optimization of an Integrated Circuit Device by Improving ITS VLSI Design from RTL to GDSII. Final Year Project, UTAR.

Thevindran, Raj Selvaraj (2016) Design/Prototype of Mechanical Seal for Scrapper Heat Exchanger. Master dissertation/thesis, UTAR.

They, Shao Peng (2022) An investigation on smartphone based machine vision system for inspection. Final Year Project, UTAR.

Thiem, Woh Mun (2015) Investigate the Feasibility of Implementing Earth-To-Air Heat Exchanger (Eahe) As a Sustainable Cooling System in Malaysia. Final Year Project, UTAR.

Tien, Chan Wai (2020) Extraction of Zinc and Iron from Steel Dust Waste. Final Year Project, UTAR.

Ting, Kung Chuang (2022) Analysis of parabolic antennas for radio telescopes and the development of encryption methods for radio astronomical images. PhD thesis, UTAR.

Ting, Ling Ling (2017) Detection of Water Pipeline Leakage using Time and Frequency Signal. Final Year Project, UTAR.

Tiong, Wei Jie (2023) Customer analysis with machine vision. Final Year Project, UTAR.

Tneh, Xuan (2023) Numerical analysis of the ducted ventilation and jet fans systems in an enclosed car park. Master dissertation/thesis, UTAR.

Toh, Wee Kai (2022) Multigeneration power: power generation from renewable source. Final Year Project, UTAR.

Tor, Liqin (2023) Development of a smart assistive stick for visually impaired people. Final Year Project, UTAR.

Tung, Jian Seng (2022) Development of air drying methods for paperboard. Final Year Project, UTAR.

W

Wai, Jie Sheng (2011) Effects of Titanium Oxide (TiO₂) On The Physical, Mechanical Ad Microstructure Properties of Alumina. Final Year Project, UTAR.

Wang, Li Khang (2023) Evaluation of the impact of lean tools on safety performance in Malaysia’s manufacturing firms. Final Year Project, UTAR.

Wong, Chee Woon (2016) Optical Characterization of Non-Imaging Dish Concentrator for Optimizing Interconnection of Solar Cells in Dense Array Concentrator Photovoltaic System. PhD thesis, UTAR.

Wong, Chi Heim (2024) Design and development of an assistive hand orthosis for hand and finger motor training. Final Year Project, UTAR.

Wong, Cho Giap (2011) Snake-like robot (programming part). Final Year Project, UTAR.

Wong, Chu Vui (2016) Investigating the Feasibility of Implementing Geothermal Cooling System in Tropical Countries. Master dissertation/thesis, UTAR.

Wong, Jun Xian (2019) Study of Energy Storage Using Phase Change Material (PCM) and Its Performance on Solar Water Heating After Sunset. Final Year Project, UTAR.

Wong, Kam Kang (2020) Development Of Fall Risk Clustering Algorithm In Older People. Final Year Project, UTAR.

Wong, Shi Kar (2024) Formulate metal-binder mixture for room temperature casting. Final Year Project, UTAR.

Wong, Song Wei (2019) Active Cool Roof System for The Attic Temperature Reduction. Final Year Project, UTAR.

Wong, Wen Kang (2023) Development of a thermoelectric generator system for IoT applications. Final Year Project, UTAR.

Wong, Yi Xuan (2023) Cooperative magnetophoresis of magnetic nanoparticles under hydrodynamic regime: Experimental and theoretical study. Final Year Project, UTAR.

Wong, Yuen Chen (2015) Investigating the Feasibility of Implementing Geothermal Cooling System in Tropical Cities. Final Year Project, UTAR.

Wong, Zong Qi (2023) Development of zirconia ceramic based feedstock for additive manufacturing technology. Final Year Project, UTAR.

Wu, Peng (2021) Design of screw extruder for three-dimensional ceramic printing. Master dissertation/thesis, UTAR.

Y

Yap, Choon Kiat (2012) Design and development of line tracking and path recognition system for vision guided autonomous vehicle. Final Year Project, UTAR.

Yeang, Kai Xiang (2024) The role of industry 4.0 in enhancing supply chain management: an empirical analysis of Malaysian manufacturing firms using PLS-SEM. Final Year Project, UTAR.

Yeo, Joey Joo Sii (2023) Development of a wearable self-powered sensor using triboelectric mechanism for human-machine interaction. Final Year Project, UTAR.

Yeoh, Chern Yi (2011) Snake-like robot (electronics part). Final Year Project, UTAR.

Yeoh, Xing Yuan (2021) Development Of A Small Scale Corexy Type 3D Printer. Final Year Project, UTAR.

Yeun, Teong Jim (2011) Development of biped robot (sensor and actuator control). Final Year Project, UTAR.

Yong, Cheng Jie (2021) Design and development of the aluminium-air battery. Master dissertation/thesis, UTAR.

Yong, Jonathan Kai Yeang (2021) Thermal management of hybrid photovoltaic systems. Final Year Project, UTAR.

Yong, Xin Yi (2023) Floating aquaculture sensor station. Final Year Project, UTAR.

Yong, Yew Rong (2013) Simulation on Eddy Current Damper and Its Regenerative Behaviour in Shock Absorber for Electric Vehicle. Final Year Project, UTAR.

Yu, Cai Hong (2016) A Numerical Studies on the Effect of Fluid Flow Pattern in the Centrifugal Pump and its Performance. Master dissertation/thesis, UTAR.

This list was generated on Sun Dec 8 11:28:55 2024 MYT.