UTAR Institutional Repository

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | C | D | G | H | K | L | N | P | S | T | W | Y
Number of items at this level: 67.

A

Ang, Richard Giap Leng (2016) Investigation on the Synthesis and Conductivity Mechanism of Graphene Based Isotropic Conductive Adhesives. Master dissertation/thesis, UTAR.

C

Chai, Zhen Hao (2015) An Investigation Study on Usage of Boric Powder and Ethylene Glycol Based Synthetic Boric Acid Polymer as Bitumen Modifiers. Final Year Project, UTAR.

Cheah, Choon Hen (2015) Optimization of Additives Concentration in Polymeric Membrane Fabrication (Low Polymer Concentration). Final Year Project, UTAR.

Chieng , Tze Sheng Alexander (2013) Disaster risk reduction in Malaysia and earthquake study based on cyclic triaxial test. Final Year Project, UTAR.

Chin, Sze Jing (2015) Study the Performance of Duckweed and Effective Microbes in Removing Arsenic from the Soil of Paddy Field and Reducing Arsenic in Paddy. Final Year Project, UTAR.

Chong, Bee Ling (2014) The services required by the Malaysian construction industry from quantity surveyors and their implications to quantity surveying graduates. Master dissertation/thesis, UTAR.

Chong, Connie Tung (2015) Performance of Anaerobic Membrane Bioreactors (AnMBRs) with Different Dosages of Powdered Activated Carbon (PAC) at Mesophilic Regime in Membrane Fouling Control. Final Year Project, UTAR.

Chung, Chen Seng (2015) Development of Natural Rubber/Graphene Derivatives-Bentonite Nanocomposites. Final Year Project, UTAR.

Chung, Wui Ket (2015) Performance of a Thermoelectric Module. Final Year Project, UTAR.

D

Darren Patrese, Anak Pada (2015) Production of Fatty Acid Methyl Ester via Subcritical Ethyl Acetate. Final Year Project, UTAR.

G

Goh, Sheng Meng (2015) Engineering Properties Of Lightweight Foamed Concrete With 10% Eggshell As Partial Cement Replacement Material. Final Year Project, UTAR.

H

Heng, Wepoh (2015) Synthesis of Triacetin from Glycerol. Final Year Project, UTAR.

Ho, Liang Chee (2013) Effect of curing regimes on mortar incorparating meatakaolin and slag at low water/binder ratio. Final Year Project, UTAR.

Hoo, Zhou Yang (2015) Automated Fruit and Flower Counting using Digital Image Analysis. Final Year Project, UTAR.

K

Kang, Qin Yee (2015) Development of Low-Cost Precision Scanner System for Scanning Probe Microscopy Application. Final Year Project, UTAR.

Khow, Hong Way (2015) Design and Development of a Brain Computer Interface Controlled Robotic Arm. Final Year Project, UTAR.

Koh, Siong Lee (2013) Development of sustainable power system for developing economies. PhD thesis, UTAR.

Kuhanraj, Vijayan (2015) Development of Nitrile Butadiene Rubber - Graphene Oxide Particles Filled Polyvinyl Chloride Composites. Final Year Project, UTAR.

L

Lam, Hou Jazz (2015) Investigation on the Usage of Optimum Content of Graphite Oxide for Bitumen Modification. Final Year Project, UTAR.

Lam, Pei Xian (2016) Setup Time Reduction in a CNC Production Facility Through Redesign of Jigs and Fixtures. Final Year Project, UTAR.

Lau, Jin Yik (2015) Hybrid Solar/Heat Pipe/Water Heater. Final Year Project, UTAR.

Lee, Jie Sheng (2015) Hybrid Solar/Heat Pipe/Thermoelectric Power Generation. Final Year Project, UTAR.

Lee, Kok Hong (2015) Heat Spreading Performance of Vapor Chamber. Final Year Project, UTAR.

Lee, Weng Hong (2015) Evaluating Optical Backhaul of a Fiber and Wireless Hybrid Broadband Network. Final Year Project, UTAR.

Lee, Yan Bin (2015) Preparation of Biochar with Palm Oil Mill Sludge by using Microwave for Copper Removal. Final Year Project, UTAR.

Lee , Ren Siong (2015) Water Absorption and Strength Properties of Lightweight Foamed Concrete With 2.5 % And 5.0 % Eggshell as Partial Cement Replacement Material. Final Year Project, UTAR.

Leong, Tuck Lun (2015) Effects of Rice Husk Ash (RHS) Produced from Different Temperatures on the Performances of Concrete. Final Year Project, UTAR.

Leong, Wai Hang (2015) FICT Final Year Project IDEAS Bank. Final Year Project, UTAR.

Leong, Weng Woh (2015) Development of Reduced Graphene Oxide/High Density Polyethlene (RGO/HDPE) High Performance Nanocomposites. Final Year Project, UTAR.

Lew, Bent Fei (2014) Factors that affect the success of industrial projects in Malaysia. Master dissertation/thesis, UTAR.

Liew, Cherrie QianYi (2016) Seismic Design Guides for Low-Rise Masonry Buildings in Malaysia. Final Year Project, UTAR.

Lim, Chin Aik (2015) Development of Nylon-6waste Tire Powder (Nylon-6wtp) Thermoplastic Elastomer for High Performance Applications. Final Year Project, UTAR.

Lim, Jun Xian (2015) Seismic verification of RC building in Malaysia to EC8-! proposed NA. Final Year Project, UTAR.

Lim, Ooi Yuan (2012) Engineering Properties of Lightweight Foamed Concrete Incorporated With Palm Oil Fuel Ash (POFA). Final Year Project, UTAR.

Lim, Yi Sin (2015) Optimization of Additive Concentration in Polymeric Membrane Fabrication (High Polymer Concentration). Final Year Project, UTAR.

Loo, Chee Meng (2015) Modelling of the Light Emitting Diode (LED) Heating/Cooling Process. Final Year Project, UTAR.

Luan, Shengyi (2015) Develop PF Mobile Application for Botany Catalogue. Final Year Project, UTAR.

N

Ng, Foong Mun (2015) Enhanced Sensing Sensitivity of Long Period Fiber Grating by Self-Assembled Polyelectrolyte Multilayers. Final Year Project, UTAR.

Ng, Kim Yeong (2012) Rainfall-Induced Landslides in Hulu Kelang Area,Malaysia. Final Year Project, UTAR.

Ng, Wei Soon (2013) Improvements in engineering properties of tropical residual soil by Microbially-Induced Calcite Precipitation. Final Year Project, UTAR.

P

Phang, Yee Jian (2015) Flue Gas Desulphurization using Adsorbent Prepared from Waster Abundant Eggshell. Final Year Project, UTAR.

Phoong, Wei Siang (2015) Software User Interface and Algorithm Development for Signal and Noise Characterization. Final Year Project, UTAR.

S

Sailesh Kuamr, Nganasekarann (2015) The Study of Oil Spillage Clean Up using Polymers. Final Year Project, UTAR.

Sandip, Singh (2015) Optimization of Biodiesel Production via Reflux Condenser Methyl Acetate Reaction from Cerbera Odollam (Sea Mango). Final Year Project, UTAR.

Saravana Kumar, Manavalan (2015) Development and Characterization of Porous Epoxy/Bentonite Clay particles through Water-Oil Homogenization Method. Final Year Project, UTAR.

Saw, Jing Xien (2015) An Investigation Into The Behaviour Of Simply-Supported Bamboo-Geotextile Composite System. Final Year Project, UTAR.

Sia, Marvin Chun Keat (2015) Effect of Sonication Combined with Hydrogen Peroxide for Sanitary Landfill Leachate Treatment. Final Year Project, UTAR.

Siah, Kuok Lim (2013) Factory floor planning optimization using Metaheuristics. Master dissertation/thesis, UTAR.

Sivanantha, Chandrasekara Pandian (2015) Improving the Infant's or Toddler's Safety Helmet using Industrial Engineering Design Techniques. Final Year Project, UTAR.

Sivanes, Murugaiah (2015) A Review Study of Floating, Production, Storage and Offloading (FPSO) Oil and Gas Platform. Final Year Project, UTAR.

T

Tai, Zu Jie (2015) Data Analysis using Particle Swarm Optimization Algorithm. Final Year Project, UTAR.

Tan, Poh Seong (2015) Investigation of Bending Effect on Long Period Fiber Gratings (LPFG) Refractive Index Sensitivity. Final Year Project, UTAR.

Tay, Yi Hui (2015) Development of Nylon-6/Graphene Oxide (GO) high Performance Nanocomposites. Final Year Project, UTAR.

Teh, Yong Hui (2015) Labview Based Pid Algorithm Development for Z Motion Control in Atomic Force Microscopy. Final Year Project, UTAR.

Tham, Mau Han (2015) Electro Oxidation of Palm Oil Mill Effluent (Pome): Post Treatment. Final Year Project, UTAR.

Tiong, Pei Kee (2015) Age Group Estimation from Face Images. Final Year Project, UTAR.

Tiu, Ervin Shan Khai (2015) Engineering properties of lightwieght foamed concrete with 7.5% eggshell as partial cement replacement material. Final Year Project, UTAR.

W

Wan, Yin Huan (2015) Structural Reliability of Jacket Platforms using Second Order Reliability Method. Final Year Project, UTAR.

Wong, Jianhui (2011) Power quality improvement using energy storage for distribution networks with renewables. Master dissertation/thesis, UTAR.

Wong, Su Khen (2015) Investigation of the Concrete Shrinkage using an Embedded Long Period Fiber Gratings (LPFGs). Final Year Project, UTAR.

Wong, Ting Yi (2015) Contactless Heart Rate Monitor for Multiple Persons in a Video. Final Year Project, UTAR.

Wong, Yau Yun (2016) Thermal Simulation of Multiple Chips LED Module Using Computational Fluid Dynamic Software. Final Year Project, UTAR.

Y

Yap, Wai Kit (2015) Flood forecasting in Langat river basin using stochastic Arima model. Final Year Project, UTAR.

Yehdish, Makhan Lal (2015) Investigation of the Optical Arrangement in Radio Telescopes. Final Year Project, UTAR.

Yong, Chun Yip (2013) Engineering properties of lightweight foamed concrete incorporated with palm oil fule ash (POFA). Final Year Project, UTAR.

Yubenraj, Ramakrishnan (2015) A Review Study of Oil and Gas Production Facility for Semi-Submersible Platform. Final Year Project, UTAR.

Yun, Huan Bin (2015) Energy Audit on Faculty of Engineering and Green Technology in Universiti Tunku Abdul Rahman. Final Year Project, UTAR.

This list was generated on Thu Apr 27 10:28:39 2017 MYT.